Coroplast Signs for Pittsburgh, PA

(No reviews yet) Write a Review

Shipping:

Free Shipping

Description

Description

This job is for 60 60x120" 4mm coroplast printed one side, contour cut with hole drill and ship to CMU Pittsburgh, PA

Sheets contain QR codes to be read by robotic instruments.

Here is a look at the whole sheet:

and a closeup of 1 strip with 4 hole drill

BACKGROUND:

Corrugated Plastic Sign Printing and Cutting RFQ

Inbox

Zania Pothen

3/18/16

to me

Hi,

I need to have 20 sheets of 5' X 10' corrugated plastic printed. These sheets need to be cut into signs with holes punched in the signs.

This work is similar to the one we have submitted the previous two years.

I have attached the sheets with this mail. There are 60 signs per sheet, 1200 signs in total.

Can you please provide us with a quote and estimate lead time?

Thank you!

Regards,

Zania Pothen

Robotics Institute

Carnegie Mellon University

5000 Forbes Ave,

Pittsburgh, PA- 15213.

Attachments area

Mike Brunstedt <fullcolorprintings@gmail.com>

3/18/16

to Zania

Hi!

I will figure this out over the weekend.

Thanks!

Mike Brunstedt, Partner

Full Color Printings
'for all of your printing needs'

We print EVERYTHING...flyers, banners, signs, posters, program books etc...so ASK US FOR A QUOTE!
216.227.8521
fullcolorprintings@gmail.com
www.fullcolorprintings.com

1452 W.110th St. Cleveland, Ohio 44102

This e-mail and any attached files are confidential, protected by copyright, and may be legally privileged. If you are not the intended addressee or have received this e-mail in error, any use of this e-mail or any copying, distribution or other dissemination of it is strictly prohibited. If you have received this transmission in error, please notify the sender immediately and then delete this e-mail. E-mail cannot be guaranteed to be secure, error free or free of viruses. Full Color Printings LLC does not accept any liability whatsoever for any loss or damage which may be caused as a result of the transmission of this message by e-mail. If confirmation is required, please request a hard copy version.

Mike Brunstedt <fullcolorprintings@gmail.com>

3/19/16

to Zania

Zania:

It will cost $1893 shipped to do your 20 5x10' sheets. The price per sheet has gone up a bit becase one supplier bought the other and so, of course, there is no competition for the coroplast sheeting.

I noticed you want 1/4" holes in the past - is that still true?

Would you like to receive a first sheet to see if this will work as you expect or should we just run the whole job. If you have never had any trouble in the past, then we should be fine. Ask around!

Let me know,

Mike Brunstedt <fullcolorprintings@gmail.com>

3/19/16

to Zania

Please also send your posters at resolution 200. The ones I have are 72. And keep the quality high like you have provided in this set. The art is extremely crisp at 72 resolution; but will blue if I stretch it to 200 resolution. If you need help, just ask.

Thanks,

Mike Brunstedt <fullcolorprintings@gmail.com>

3/24/16

to Zania

Wondering if anything is going on with this project.

Let me know,

Zania Pothen

3/24/16

to me

Hi Mike,

Sorry for the delay in sending my reply. I have been travelling the past couple of days.

I still need the posters for the project. I will be placing an order for 25 sheets which I should bring the total cost to $2400 (assuming that its $94 per sheet).

I haven't yet figured out how to increase the resolution to 200 from 72. Your suggestions would be appreciated.

The requirement for 1/4" holes is still the same.

Could you also let me know how long it would take to get these posters printed and shipped once the order is confirmed?

Regards,

Zania

Mike Brunstedt <fullcolorprintings@gmail.com>

3/25/16

to Zania

Hello Zania:

Printing only takes 2 or 3 days. Then 1 day ground to PGH.

Re. resolution, I know in the past .eps files have been sent over.

What program are you using to make each set of qr codes? There is probably a setting that I can find.

Let me know,

Mike Brunstedt <fullcolorprintings@gmail.com>

3/25/16

to Zania

Zania:

Here's some scraps from emails when we first started the project a few years back:

"Mike, I'm using libqrencode to generate all of the (single) QR images:
http://fukuchi.org/works/qrencode/index.html.en

I can provide them natively in any of these formats:

{PNG,EPS,SVG,ANSI,ANSI256,ASCII,ASCIIi,UTF8,ANSIUTF8}""

See attachments for some files from the past.

You will probably want to export files somehow.

Let me know what happens,

3 Attachments

Zania Pothen

3/28/16

to me

Thanks Mike.

I am attaching a test poster with 200dpi could you have a look a see if quality is good?

Thanks,

Zania

poster_001.eps

Attachments area

Mike Brunstedt <fullcolorprintings@gmail.com>

3/28/16

View AllClose

Related Products